REGOLATORE ESC QUICRUN-WP-8BL150

QUICRUN-WP-8BL150
1 Features

1.1 Water-proof and dust-proof for all-weather races.
(Note: please uninstall the cooling fan before using this ESC in water; Clean and dry it soon after the use for avoiding the connectors get rusty.)
1.2 External programming port, easy to connect to the Program Card when setting the ESC.
1.3 Proportional brake with 4 steps of maximum brake force adjustment and 8 steps of drag brake force adjustment.
1.4 9 steps of acceleration (/punch) adjustment from "soft" to "Very aggressive" to fit for different kinds of models, tires and tracks.
1.5 Multiple protections: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor lock-up protection.
1.6 One-button (the "SET" button on the ESC) to set the ESC, and easy to reset all parameters to the factory default settings.
1.7 Compatible with the optional device ---- the portable Digital LED Program Card, especially convenient for outdoor use.


2. Specifications QUICRUN-WP-8BL150

Continius Current 150A
Peak Current 950A
Resistance 0.00035 Ohm
Motor Type Supported Sensorless Brushless Motor
Car Applicable 1:8 Buggy/Monster
Motor Limit for 4S Lipo or 12 cells NiMH: 4274-size or smaller motor with the KV<3000
Motor Limit for 6S Lipo or 18 cells NiMH: 4274-size or smaller motor with the KV<2400
Battery 9-18 Cells NiMH or 3-6S Lipo
BEC Output 6V/5A (Switch Mode)
Size 59.5(L)*48(W)*42(H)
Weight 178g / 178g
External Program Port Available
Working voltage of Fan From BEC (6V)


3. Programable items

Parameter List of QUICRUN-WP-8BL150

Programmable item
1. Runing Mode (Note1) 3 Settings
2. Drag Brake Force 5 Settings
3. Low Voltage Cutoff 5 Settings
4. Start Mode (Punch) 9 Settings
5. Max. Brace Force 5 Settings
6. Max. Reverse Force 4 Settings
7. Initial Brace Force 4 Settings
8. Throttle Range 3 Settings
9. Timing 8 Settings
10. Overheat Protection 2 Settings
11. Motor Rotation 2 Settings
12. Cell Count (Note2) 6 Settings

Note1: Fwd = Forward, Rev = Reverse, Br = Brake
Note2: When set to the "Auro-idenrification" mode, the battery pack can only be identified as 25, 45 and 65 LiPo. Because the normal voltage of each LiPo cell varies from 2.6V to 4.2V, it's not easy to correctly calculate the cell count of a discharged LiPo battery pack. Therefore, we strongly suggest you set the LiPo Cells manually.